In general latex clothes are designed to be tight-fitting. Therefore they can be difficult to put on without the aid of a lubricant. There are 3 main methods of preparing latex catsuit for wearing.
(1) Lightly dust the inside of the garment with talc before putting on, because stray talc and dust is very visible against the rubber.
(2) Use a silicone-based lubricant such as “Eros Bodyglide” or “Eros Cult Dressing Aid”. Apply a thin coating to the inside of the garment and your skin if necessary.
(3) A third method of reducing or eliminating the high friction of latex when dressing is to chlorinate the rubber.
Rubber can easily be marked or torn with fingernails if excessive force is used when pulling on your garment. Make sure your garment is well lubricated or talced. You may also wish to wear a pair of light cotton gloves to avoid any damage
When handling latex with bare hands make sure they are clean before coming into contact with your garment. Be aware that rubber can be stained permanently brown if in contact with copper, brass or bronze – take care with copper coins
Never expose latex to essential oils
Never expose your garment to naked flame and fire as rubber burns